Diy Bathroom Drain Stopper
Diy Bathroom Drain Stopper. Push the stopper closed to reveal the center post. Carefully remove the cover plate, and extract the connecting rod and spring up through the overflow opening.
In this video, we are replacing a stubborn drain stopper in the bathtub. We will be showing you how we installed a new sink drain and pop up stopper in a bathroom. (on some styles, the rocker arm on the drain stopper fits.
Unscrew The Pivot Rod Retaining Screw And Remove The Pivot Rod So You Can Pull Out The Stopper To Clean The Drain.
Take out the stopper or. (you can use the wet/dry vac to do this, as well.) step 2: Loosen the pivot rod nut after and remove the pivot rod from the drain tailpiece.
Push The Stopper Closed To Reveal The Center Post.
Set it to the side. First, you’ll remove the pivot rod clip by squeezing it and pulling it off. When reassembling the stopper, make sure you insert the.
(On Some Styles, The Rocker Arm On The Drain Stopper Fits.
We hope these tips will help you as you install a new drain and s. We will be showing you how we installed a new sink drain and pop up stopper in a bathroom. When the parts are cleaned, you can.
In This Video, We Are Replacing A Stubborn Drain Stopper In The Bathtub.
Carefully remove the cover plate, and extract the connecting rod and spring up through the overflow opening. Drain as much water out of the basin as possible. Push and pull with the stopper in the open position, unscrew the knob from the stopper base.
Post a Comment for "Diy Bathroom Drain Stopper"